ПОЛУЧЕНИЕ И СВОЙСТВА ДИСПЕРСНО-УПРОЧНЕННЫХ ЛЕГКИХ СПЛАВОВ
Аннотация
Статья представляет собой обзор посвященный анализу существующих дисперсно-упрочненных композиционных материалов на основе легких сплавов. Кратко рассмотрены методы получения данных материалов, их свойства, а также характер взаимодействия Ti, Mg и TiAl с дискретными керамическими частицами таких соединений как Al2O3, TiB2, TB, SiC, Nd2O3, Ti5Si3,Ti2AlC, TiC и B4C. Показано, что среди упомянутых методов производства дисперсно-упрочненных композитов, наиболее перспективными и экономически выгодными являются методы порошковой металлургии.
Ключевые слова
Полный текст:
>PDF
Литература
Chudina О. V. Tehnologicheskie puty povishenya mechanicheskih svoystv na osnove strukturnoy teorii prochnosty / О. V. Chudina // Tehnologiay metallov – 2003, – № 6. — s. 16—23.
Tushinskiy L. I. Teoriya I tekhnologiya uprochneniya metallicheskikh splavov. – Novosibirsk.: Nauka, Sibirskoe otdelenie, 1990. – 306 s.
Antsiferov V. N. Cpechennye splavy na osnove titana / V. N. Antsiferov, V. S. Ustinov, Yu. G. Olesov. – M.: Меtallurgiya, 1984. – 168 s.
Stepanchuk A. N. Tehnologiya poroshkovoj / A. N. Ste pan chuk, I. I. Bilyk, P. А. Bojko. – К.: Vyshcha shk., 1989. – 415 s.
Lifang C. Research on development of in situ titanium matrix composites and in situ reaction thermodynamics of the reaction systems / C. Lifang, Z. Yongzhong, S. Likai // Journal of University of Science and Technology, Beijing. – 2006. – V. 13. – P. 551 – 557.
Chuchelin B. B. Titanovye splavy v mashinostroenii / B. B. Chuchelin, S. S. Ushkov, I. N. Razueva. – L.: Mashinostroenie, 1977. – 248 s.
Ivasishen O. M. Proizvodstvo titanovyh splavov i detalej ekonomichnym metodom poroshkovoj metallurgii dlya shirikomasshtabnogo promyshlennogo primeneniya / О. М. Ivasishen, D. G. Sabbkin, К. А. Bondarev // Nauka i innovatsii. – 2005. – №2. – s. 44 – 57.
Lehovitser Z. V. Isledovanie vliyaniya rezhima spekaniya na svojstva poroshkovogo materiala 2М2А / Z. V. Lehovitser, I. А. Gerasimenko, G. Ya. Miroshne chenko, I. О. Bykov // sb. nauch. tr. – 2009. – № 48. – s. 112–119.
Vishnyakov L. R. Kompozitsionnye materialy. Spravochnik / L. R. Vishnyakov, Т. V. Grudina, D. M. Kar pinos, L. I. Tuchinskij // Institut problem materiallovedeniya AN USSR. – К.: Naukova dumka, 1985. – 592 с.
Yamamoto T. Synthesis of near net shape high density TiB/Ti composite / T. Yamamoto, A. Otsuki // Mater. Sci. Eng. – 1997. — V. 239—240. – P. 647—651.
Haibo F. Spark plasma sintering reaction synthesized TiB reinforced titanium matrix composites / F. Haibo, J. Dechang, Z. Yu // Composites, Part A. – 2005. —V.36. – P. 558—563.
Poletti C. Production of titanium matrix composites reinforced with SiC particles / C. Poletti, M. Balog M., T. Schubert // Composites Science and Technology. – 2008. – V.68. – P. 2171 – 2177.
Junqiang L. In situ preparation of (TiB+TiC+Nd2O3)/Ti composites by powder metallurgy / L. Junqiang, Q. Jining, L. Weijie, L. Yang // Journal of Alloys and Compounds. – 2009. – V.9. – P. 116 – 122.
Kim Y. Processing and mechanical properties of Ti–6Al–4V/TiC in situ composite fabricated by gas–solid reaction / Y. Kim, H. Chung, S. Kang // Mater Sci Eng. – 2002. – V. 333. – P. 343 – 350.
Silva A. Microstructural and mechanical characterization of a Ti-6Al-4V/TiC/10p composite processed by the BE-CHIP method / A. Silva, J. Santos, T. Stro haecker // Compos. Sci. Technol. – 2005. –V.65. – P. 1749 – 1755.
Sinel’nikova V. S. Alyuminidy / V. S. Sinel’nikova, V. A. Podergin, V. N. Rechkin. – K: Naukova Dumka, 1985. – 243 s.
Sereda B. P. Issledovanie strukturoobrazovaniya alyuminidov titana pri ih poluchenii metodom SVS / B. P. Sereda, А. А. Zherebtsov // Stroitel’stvo, materialovedenie, mashinostroenie. Sbornik nauchnyh trudov. – Dnepropetrovsk: – 2008, V.45, Ch. 1, – 91—94 s.
Yeh C.L. Formation of TiAl–Ti2AlC in situ composites by combustion synthesis / C.L. Yeh, Y.G. Shen // Intermetallics. – 2009. – V. 7. – P. 169—173.
Kevorkijan V. Pressureless sintering and characterization of B4C, TiC and TiB2-particle-reinforced TiAl3-matrix composites
/ V. Kevorkijan, S.D. Skapin // Materials and technology. – 2009. – V. 3. – P. 123—128.
Yeh C.L. Formation of TiAl-Ti5Si3 and TiAl-Al2O3 in situ composites by combustion synthesis / C.L. Yeh, R.F. Li // Intermetallics. – 2008. – V. 16. – P. 64—70.
Kvanin V. L. Poluchenie intermetallidov —TiAl metodom SVS-pressovaniya / V. L. Kvanin, N. Т. Bala hina, S. G. Vadchenko, I. P. Borovinskaya // Neorganicheskie materialy. – 2008. – № 11. – s. 1327—1331.
Ramaseshan R. Microstructure and some properties of TiAl-Ti2AlC composites produced by reactive processing / R. Ramaseshan, A. Kakitsuji, S.K. Seshadri, N.G. Nair // Intermetallics. – 1999. – V. 7. – P. 571—577.
Lyahov N. Z. Vliyanie mehanoaktivatsii na protsessy pazo – i strukturoobrazovaniya pri samorasprostranyayushchemsya vysokotemperaturnom sinteze / N. Z. Lyahov, T. L. Talako, T. F. Grigor’eva – Novosibirsk: Parallel, 2008. – 168 s.
Nie X. Patents of methods to prepare intermetallic matrix composites: A Review / X. Nie // Recent Patents on Materials Science. – 2008. – V. 1. – P. 232—240.
Kevorkijan V. Fabrication and characterization of TiAl/Ti3Al-based intermetallic composites (IMCs) reinforced with ceramic particles / V. Kevorkijan, S.D. Skapin // Archives of Materials Science and Engineering. – 2009. – V. 40. – P. 75—83.
Li Z. Oxidation behaviour of Ti3Al–TiC composites / Z. Li, W. Gao, J. Liang, D.L. Zhang // Materials Letters. –
– V. 57. – P. 1970—1976.
Alman D. E. Reactive sintering of TiAl-Ti5Si3 in-situ composites / D.E. Alman // Intermetallics. – 2005. – V. 13. – P. 572-579.
Rao K.P. Characterization and mechanical properties of in situ synthesized Ti5Si3-TiAl composites / K.P. Rao, J.B. Zhou // Materials Science and Engineering. – 2003. – V.35. – P. 208–218.
Rao K.P. Comparison of titanium silicide and carbide reinforced in situ synthesized TiAl composites and their mechanical properties / K.P. Rao, A.Vyas // Intermetallics. – 2011. – V. 19. – P. 1236 1242.
Yeh C.L. Formation of TiAl-Ti5Si3 and TiAl-Al2O3 in situ composites by combustion synthesis / C.L. Yeh, R.F. Li // Intermetallics. – 2008. – V. 16. – P. 64–70.
Horvitz D. In situ processing of dense Al2O3–Ti aluminide interpenetrating phase composites / D. Horvitz, I. Gotman, E.Y. Gutmanas, N. Claussen // Journal of the European Ceramic Society. – 2002. – V. 22. – P. 947–954.
Li Z.W. High temperature oxidation behaviour of a TiAl–Al2O3 intermetallic matrix composite / Z.W. Li, W. Gao, D.L. Zhang, Z.H. Cai // Corrosion Science. – 2004. – V. 46. – P. 1997–2007.
Taotao A. Microstructure and mechanical properties of in-situ synthesized Al2O3/TiAl composites / A. Taotao // Chinese Journal of Aeronautics. – 2008. – V. 21. – P. 559–564.
Taotao A. Fabrication and mechanical properties of Al2O3-TiAl composite / A. Taotao // A. Taotao // Journal of Wuhan of Techolotgy-Mater. – 2009. – V. 24. – P. 732–736.
Hai Zhi Ye Review of recent studies in magnesium matrix composites / Hai Zhi Ye, Xing Yang Liu // Journal of Materials Science. – 2004. – V. 39. – P. 6153–6171.
Lee K.B. Reaction products of Al–Mg/B4C composite fabricated by pressureless in ltration technique / K.B. Lee, H.S. Sim, S.Y. Cho, H. Kwon // Materials Science and Engineering. – 2001. – V. 2. – P. 227–234.
Contreras A. Mg/TiC composites manufactured by pressureless melt in ltration / A. Contreras, V.H. Lopez, E. Bedolla // Scripta Materialia. – 2004. – V. 52. – P. 249–253.
Falcon-Franco L. Wear performance of TiC as reinforcement of a magnesium alloy matrix composite / L. Falcon-Franco, E. Bedolla-Becerri, J. Lemus-Ruiz // Composites:. – 2011. – V. 42. – P. 275–279.
Zhang Х. New In-situ Synthesis Method of Magnesium Matrix Composites Reinforced with TiC Particulates / Х. Zhang, L. Liao, M. Naiheng // Materials Research. – 2006. – Vol. 9. – № 4. – P. 357–360.
Zhang D. Wetting of B4C, TiC and graphite substrates by molten Mg / D. Zhang, P. Shen, L. Shi, Q. Jiang // Materials Chemistry and Physics. – 2011. – V. 130. – P. 665–671.
Kevorkijan V. Fabrication and characterisation of mg-B4C composites / V. Kevorkijan, S.D. Skapin // MJoM. – 2009. – V. 15. – P. 3–18.
Chen Y.X. Microstructure and orientation relationships of Mg alloy matrix composite reinforced with SiC whiskers and B4C particles / Y.X. Chen, D.X. Li // Materials Letters. – 2007. – V. 61. – P. 4884–4886.
Ссылки
- На текущий момент ссылки отсутствуют.
| КОНТАКТЫ | СОБЫТИЯ | ПРАВОВАЯ ИНФОРМАЦИЯ |
| ул. Кирилловская, 19-21, Киев, 04080, Украина Тел./факс: +3 8 (044) 455-93-92 Е-mail: iiii@ukrniat.com, ukrniat@ukrniat.com |
| Некоммерческое использование материалов сайта technological-systems.com.ua (в том числе цитирование и сокращенное изложение) разрешается при условии размещения прямой ссылки на цитируемый материал или на главную страницу technological-systems.com.ua. Любое коммерческое использование, а также перепечатка материалов возможны только с письменного разрешения редакции. |